Swordsoft layout serial number manual#
Swordsoft layout serial number upgrade#

For this you may choose one of the predefined Swashplate mixing types at Setup menu point H before which matches your swashplate mixing type best. make sure that servo directions have been setup correctly at Setup menu point I and that you stick control on the radio are moving the swashplate into correct directions (forwards, backwards, left and right). Please note that for setup you have to make sure that your helicopter control is basically working already, i.e. If the presets do not cover what you are looking for you can freely define your swashplate geometry using the 'Expert Settings'.Īs this is asked very often we will give a brief explanation here what you are intended to do when setting up of swash phasing is necessary for your scale helicopter. So in fact there is no difference between the Basic Settings and the Expert Settings, both will change the same values. These are only presets for creating your custom swash mixing more easily as you don't have to enter angles and distances separately as it can by done in the section below! Also when rotating the swashphasing by the rotation box in reality this will change the swash angles as you can see in the fields below. Note these presets have nothing to do with the predefined presets of the Swashplate mixing setup menu point. Then only rotate the swash phasing as necessary. If you are having a scale heli and need phasing for your rotor head you can normally start using a preset swash mixing type from the 'Basic Settings' in the upper section: Make sure that the custom preset is selected as swashplate mixing type (dialog's header shows 'Active') if you want to see any changes reflected on your model in real-time. The Custom Swashplate Mixer allows you to use any geometry as long as you are able to define it. Then an additional window will open where you can specifically adjust all values necessary for defining the swash mixing. To edit the custom preset for swashplate mixing please click on the 'Custom' link. Please note that it is not sufficient to adjust the preset value! You also must choose the custom preset in the menu structure so AR7200BX/AR7300BX will use this value instead of one of the predefined presets.

if you need to set a value which is not offered by the existing presets.

Swordsoft layout serial number manual#

For a detailed explanation of the setup please consult the AR7200BX/AR7300BX instruction manual that matches the firmware version of your device.īesides of the predefined presets AR7200BX/AR7300BX allows to create a custom preset which you can choose instead of the predefined presets, i.e. If you hover the mouse cursor over the name of a Setup menu point you will get a brief information what this setup parameter does. It is not possible to adjust parts of the setup that require user feedback or feedback from your helicopter like 'Rudder servo limit' or 'Swashplate servo throw' adjustment.

a message in the Save changes section shows 'Unsaved Settings' and the count of changed values.

the actual values are highlighted in light-blue, showing the actual state of the value.On the other hand if you decide to 'Save changes manually', new values will only get collected and you can control the moment when to store these values by pressing the 'Save now' button or rolling back using the 'Undo' button.Īs long as changes haven't been committed: But if the 'Save changes manually' box on the bottom of the window is NOT selected, changed values are collected and stored automatically after a short amount of time when no more values are changed. If you change a value then this will not be stored instantly on the device. Once the file is available on the server it is marked with 'DONE' and you can directly upload it to your device by again clicking the list entry.

To update/upgrade simply click the firmware file to request generating the firmware.

Swordsoft layout serial number upgrade#

If you're logged in with your freakware Network account and the device is registered to your account you will also see firmware files and upgrade options available for this device. You can view and save the latest manual(s) for this device from the section below. Also you can store a custom picture for this device, i.e. If you have any comments that you would like to store together with your device, you can note them in the comment section. This makes it easier to distinguish multiple devices at the same time. If you connect you device for the first time you will be asked to provide a custom device name.